CELTO ACOUSTIQUE CT10

Description

FEATURES
– Real 300W RMS power capacity (8 hours pink noise)
– Natural sound and incredible holographic reproduction
– Optimized for smooth frequency response in and out axis
– Premium custom made European Drivers
– Proprietary 80ºx50º rotatable Elliptic horn
– Birch plywood cabinet with tongue & groove assembly
– Touring grade soft touch gloss-free black painting

APPLICATIONS
CT10 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer, portable system or permanent installation, monitor in small stages, and delay fill.
Suitable for :
– FoH
– Multi-functional room
– Auditorium and Theater
– Pub
– Bar
– Commercial announcements

SPECIFICATIONS
– Power Capacity (50~15000Hz pink noise 8 hours) : 300W RMS / 600W Program
– Nominal impedance : 8 Ohm
– Frequency response (-6dB half space, no EQ) : 46~19000Hz
– Manufacturing Consistency tolerance : ±2dB from 300 to 10000Hz
– Average Sensitivity : 97dB/W/m (wideband 200~16000Hz)
– Maximum Calculated SPL @ 1m : 122dB continuous / 125dB Program
– Nominal Directivity (-6dB) : 80° x 50° above 1200Hz
– Recommended low cut filter : 40Hz 24dB/oct in full range mode . 60-140Hz with subwoofer
– Low Frequency driver : Custom made 10″ CELTO driver . Ferrite magnet, 2,5” In / Out Voice coil
– High Frequency driver : Custom made 1” exit CELTO driver . Ferrite magnet, 1,7” Voice coil, 300 C° Polymer diaphragm
– Crossover : Passive mode only 1700Hz, 12dB/oct on LF . 18dB/oct on HF
– Flying hardware : 11 M8 points
– Connectors : 2x NEUTRIK Speakon® NL4MP (1+/1- Link, 2+/2- Input & Link)
– Floor Monitor use : Yes, 2 symmetric angles
– Pole mount : 35mm top hat
– Cabinet : CNC made with tongue and grove assembly 15mm birch plywood
– Finish : Touring grade textured black mat rubberized coating
– Size (WxHxD) : 330x550x320 mm
– Weight : 18kg net, 21kg gross