• The Tecnare SW18VR is an advanced very compact high power Bass enclosure that can be stacked or flown together in array configuration with CLa21 Line Source.
• The SW18VR loudspeaker is housed with one 18-inch long excursion transducer in hybryd configuration, designed to reproduce a clean “punchy “ low frequency response.
• This high efficiency design delivers extremely low distortion, coherent bass output from 48 Hz to 200Hz with a max SPL of 138 dBSPL (12dB crest factor pink noise at 1m) and a power handling of 2400 W watts continuous.
• The impedance is nominal 8 ohms.
• SW18VR enclosure is designed to be flown or ground-stacked.
• Combination of forward and rear facing enclosures can be configured as a directional subwoofer array with specific directional properties, including cardioid.
• The SW18VR is fully capable of operating without SubBass in applications where extreme LF performance is not required.
• The loudspeaker is constructed of 18 mm ply Baltic birch and have an impact resistant paint finish, properly braced for the intended use and a rugged steel grill.
• The connectors are Neutrik™ NL4. The SW18VR incorporate Tecnare’s rigging integrated with CLa21 line source rigging hardware.


– High output bass system
– 1 x 18-inch-LF cone driver, Hybrid Horn/Reflex loaded
– Optimally vented for increased response
– Concert Hall
– Stadium, arenas, theatres and Auditorium
– Club sound reinforcement
– Suitable for flown or ground stacked used.

Engineering Specifications
– Frequency Response : 48 Hz – 200 Hz
– Components : 1 x 18” Long Excursion Woofer
– Nominal Dispersion : 360º
– Impedance : 8 Ohm
– Axial Sensitivity : 101 dB (1w/1m)
– Calculated SPL : 132 dB continuous / 138 dB peak
– Power Handling : 1200 W AES / 2400 W continuous
– Dimmensions (HxWxD) (millimeters/inches) : 513x699x780 mm . 20.19″ x 27.52″ x 30.71″
– Net Weight (kg/Pounds) : 67 Kg . 147.71 lbs
– Construction : 18mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. Two recessed carrying handle.
– Grille : Powder coated perforated steel with acoustically transparent reticulated foam.

Color Versions
• White color
• Black color
– Multipurpose Top Grid: THV-21/18V
– TRK-18VR rigging hardware kit for one SW-18VR
– Wooden dolly TWD-18VR
– Two-high SW-18VR Transit Cover: Covers two stacked
– Three-high SW-18M Transit Cover: Covers three stacked
• SW18VR A. DSP Fixer on factory
• SW18VR PCC-3 Network controlled DSP


There are no reviews yet.

Be the first to review “TECNARE SW-18VR”

Your email address will not be published. Required fields are marked *