HILL AUDIO RPX-3400

Description

Stereo 3-Way/Mono 4-Way Active Crossover with Limiter
• The RPX-3400 is a stereo 2/3-way | mono 4-way active crossover, designed for better sound and protection by multi-amping a sound system.
• With a flip of the rear side switch, the unit can be configured either in stereo 2/3-way or mono 4-way mode, while the front panel status LEDs visualize which control has which function assigned.
• The incoming signal is divided into relative frequency bands via precise Linkwitz-Riley filters, which sport seamlessly adjustable crossover frequencies, and offer best driver protection by their steep 24dB/Octave slope.
• For further protection, 25 Hz Low Cut filters are fitted in both inputs to eliminate inaudible high-energy bass content, and limiters on all outputs are provided with central threshold control.
• LF driver misalignment is easily accounted for by the adjustable delay control, and the typical roll-off of constant directivity horns can be counteracted with a switchable filter.
• To make the best use of centrally located subwoofers, the LF outputs can be summed via the “LF SUM” function, making sure that in-phase signals from all subs deliver extra gain. Mute and Phase Invert switches for all outputs make troubleshooting a breeze.
• Compared to digital loudspeaker management systems, the RPX-3400 is not only more affordable, it also offers greater ease-of-use and a full 20dB signal headroom that only an analog processor can provide.

Features
– Stereo 2-way/3-Way/Mono 4-way active crossover
– Linkwitz-Riley filters with 24 dB/octave slope; flat summed amplitude response, zero phase difference
– Low/Mid Crossover frequencies adjustable in two switchable ranges: 44 to 930 Hz and 440 Hz to 9.3 kHz; Mid/High frequencies adjustable 440 Hz to 9.3 kHz
– Adjustable time delay for phase alignment between drivers
– “LF Sum” function for mono subwoofer operation
– Individual Limiters on every output
– Individual output level controls for all bands
– Individual output mute switches for all bands
– Individual phase reverse switches for all bands
– CD horn equalization (+3 dB at 3.5 kHz, 6 dB/Oct. boost up to 22.5 kHz)
– Switchable 25 Hz low cut filter in each input
– Balanced XLR connectors for all inputs and outputs
– All switches with LED status indicator
– Internal wide-voltage swing linear power supply for excellent audio dynamics
– Full metal case with detachable rack ears
– AC mains voltage selector switch 115/230V
– CE/ROHS compliant