ENTTEC Pixie Driver

• Controlling individual pixels reliably now at your fingertips.
• Combine the power and control using Pixie Driver, to realize previously unimaginable visual effects, right at your fingertips.
• Pre-programmed or live, Pixie Driver unlocks the full potential of pixel LED.
• Available in 5V (55 or 110 WATTS), 12V (65 or 130 WATTS), or 24V (65 or 130 WATTS).

Description

Features
• High density
– Available in 6 versions (based on voltage and max. power).
– The 110 Watts Pixie driver can control up to 600 RGB LEDs from one source (USB), the 55 Watts can control up-to 300 RGB LEDs.
– This means you need less hardware to controls more strips.
• Supports a wide range of Pixel tape and dots
The following protocols are fully compatible with Pixie driver:
– WS2811
– WS2812
– WS2812b
– WS2813
– 9PDOT
– SK6812
– TM1804
– TM1812
– APA-104
• Smallest in its Class
– With an overall size of 215mm x 129mm x 42.7mm, the Pixie driver is the smallest all in one device in its class.
– A rack mount frame allows mounting of 8 units in a 3RU high enclosure offering an unparalleled density of Pixel strip driving.
• Standalone mode
– With inbuilt memory, the Pixie driver can be set to replay a pre-programmed sequence.
– Standalone sequence is recorded via USB using Pro Manager software (Art-Net input).
– Only one sequence can be stored at any single time – and runs on power-up.
• Live Mode
– Drive the Pixels using DMX input from its 2x DMX ports.
– DMX Personality decides how the 2 DMX inputs are mapped.
Apps
– PRO-Manager (OSX up to 10.11)
Pixie Driver Standalone Shows
– Rainbow fade (both outputs, RGB)
– Rainbow (both outputs, RGB)
– Plasma (D1, RGB)
– Sample (D1, RGBW)
– Full white (D1, RGB)
– Test sequence (both outputs, RGB)
– Test sequence (both outputs, RGBW)
– Rainbow Fades (both outputs, RGB)
– Rainbow fades (both outputs, RGBW)

Reviews

There are no reviews yet.

Be the first to review “ENTTEC Pixie Driver”

Your email address will not be published. Required fields are marked *