• 2×2 matrix
• Top grade 48 kHz/24 bit DSP
• Automated room EQ
• Dynamic loudness
• Limiter
• RMS compressor
• Delay in time or distance
• White/pink noise generator
• Sound masking
• Auto on / auto off
• Energy Star compliant
• No fan


• …is an understatement.
• In addition to being a highly advanced amplifier, CA280DSP features a very advanced DSP, automated room EQ, sound masking and high/low impedance mode.
• All easily accessed remotely.
• Designed for AV installers and integrators, CA280DSP is packed with features and very easy to use.
• It offers excellent sound quality in a compact housing.
• Simply access the amplifiers Wi-Fi network.
• Load settings for your Cornered loudspeakers, Add room EQ, Delay, RMS Compression, Dynamic EQ or even Sound Masking if needed.
• Run the speakers in high or low impedance – or run one channel with a line of 100V speakers and connect an 8 ohm subwoofer to the other channel.
• The choice is yours.
• The CA280DSP will take it from there and with auto on/auto off and a fan-free design, chances are you will never see it again.
• The amplifier section uses a very efficient switch mode power supply and two Class D output stages with ultra-low distortion and a full set of circuit protections including over-current, over/under voltage, output, DC.
• Furthermore, an efficient heat dissipation system and over-heat protection ensures uncompromising reliability.
• The top grade 48 kHz/24 bit DSP engine is capable of sophisticated loudspeaker processing.
• There are 5 EQ’s on the input channels and 30 EQ’s on the output channels.
• Each band can be switched to Bell, Lo/Hi-Shelving with variable Q.
• The HP/LP filters offers slopes from 6dB/Octave up to 24dB/octave including Bessel, Butterworth and Linkwitz-Riley.
• Adding an ASIO card, CA280DSP can sweep the room and set the EQ automatically.
• Fast and efficiently.
• With 2x140W @ 4ohm or 8ohm or 1x280W for 70V/100V Direct Drive, the output-to-size ratio is excellent.
• The switch-mode power supply has auto voltage sensing.
• CA280DSP excels in performance, ease of use and reliability and is the perfect fit for the Cornered loudspeakers.

Network Connection & Control
– USB, RJ45 or Wi-Fi connection for system setup, monitoring and control via remote PC software (included)
– Simultaneous control of up to 32 units via PC software
– Pre-sets for all Cornered loudspeakers
– Connection for remote volume control (GPIO)
– Number of Channels: 2
– Max Output Power (4&8 ohm) 2x140W
– Max Output power (Bridged) 1x280W
– Max Output power (100V) 1x280W
– Output Circuitry: Class D
– THD+N: <0.003%
– Signal To Noise Ratio: >105 dB
– Frequency Response 20-20kHz±0,1dB
– Power Supply: Universal
– Operating Range: 110-240V Mains
– Stand-By 0,25 watt
– Maximum Input/Output Level: +12 dB
– Connections: Phoenix with link on input
– Dimension: 1U half rack space . (HxWxD): 44x220x234mm
– Weight: 2,54 kg


There are no reviews yet.

Be the first to review “CORNERED AUDIO CA280DSP”

Your email address will not be published. Required fields are marked *