CHAUVET PRO ÉPIX Strip IP 50
• ÉPIX Strip IP 50 is an IP65 outdoor-rated pixel-mapping ½ meter LED strip fixture, featuring 50 LEDs.
• Ideal for use in tight spaces, this versatile fixture also comes with dome and flat accessories and stunning pre-built content to allow you to easily configure and program shows in minutes with minimum time/effort.
• Power and control it through our new ÉPIX Drive 2000 IP on Art-Net, Kling-Net, or sACN (streaming ACN).
At a Glance
• Pixel-mapping IP65 outdoor half-meter 50 x 1 LED strip for showing video and/or motion graphics
• Includes square milky filter (installed) for diffused output, round milky filter (included) for diffused output, and black stealth filter (included) for high contrast
• Versatile control options include Art-Net, Kling-Net, and sACN (streaming ACN) to support the touring, rental, and installation markets
• Reduce programming time and increase application by using the alternate personalities of 7 channel, multi-section control (15-30 channels), or use the Pixel personality (150 channels) for use with video servers
• Increase viewing angle by using the dome or square accessory
• ÉPIX Drive 2000 IP required for operation
Description
Specifications :
Optical
– Light Source: 50 LEDs (tri-color RGB) SMD 5050, 50,000 hours life expectancy
– Viewing Angle (with installed Square Milky Filter): 160°
– Viewing Angle (with optional Round Milky Filter): 160°
– Viewing Angle (with optional Black Stealth Filter): 125°
– Illuminance – open: 8,640 NITS
– Illuminance – Square Milky Filter (installed): 2,470 NITS
– Illuminance – Black Stealth Filter (included): 1,455 NITS
– Illuminance – Round Milky Filter (included): 1,360 NITS
– Pixels: 50 x 1
– Pixel Pitch: 10 mm
– Refresh Rate: 4,800 Hz
Construction / Physical
– Dimensions (with installed Square Milky Filter ): 19.68 x 1.33 x 3.93 in (500 x 34 X 100 mm)
– Dimensions: (with included Black Stealth Filter) 19.68 x 1.33 x 3.46 in (500 x 34 x 88 mm)
– Dimensions (with included Round Milky Filter): 19.68 x 1.77 x 5.03 in (500 x 45 X 128 mm)
– Weight: 3.4 lb (1.5 kg)
– Exterior Color: Black
– Housing Material: Aluminum
Connections
– Data Connectors: IP-65 4-pin XLR
– Physical Linking: 20 inline ÉPIX Strip IP per port of Drive 2000 IP
– Minimum required device linking cable size: 4 conductor (2 x 14 AWG, 2 x 16 AWG)
– Total max. cable length (shielded cables) between ÉPIX Drive 2000 IP and last ÉPIX IP fixture: 210 ft (64 m)
– Max. cable length (shielded cables) between ÉPIX Drive 2000 IP and first ÉPIX IP fixture: 65 ft (20 m)
– Max. cable length (shielded cables) between ÉPIX IP fixtures: 60 ft (18 m)
– Total max. cable length (unshielded cables) between ÉPIX Drive 2000 IP and last ÉPIX IP fixture: 300 ft (91 m)
– Max. cable length (unshielded cables) between ÉPIX Drive 2000 IP and first ÉPIX IP fixture: 150 ft (45 m)
– Max. cable length (unshielded cables) between ÉPIX IP fixtures: 100 ft (30 m)
Control
– Control Protocol: Art-Net, Kling-Net, sACN
– Control Channels Art-net, sACN: 7, 15, 30, 75, or 150
Electrical
– Power and Current: 16 W, 0.133 A @ 120 V, 60 Hz
– Power and Current: 17 W, 0.082 A @ 208 V, 60 Hz
– Power and Current: 17 W, 0.073 A @ 230 V, 50 Hz
Reviews
There are no reviews yet.